Ultimaker 2+

From CEED Wiki
Revision as of 14:20, 16 June 2021 by Jboud030 (talk | contribs)
Jump to navigation Jump to search
Ultimaker 2+
Ultimaker2+.png
Slicer Cura
Build Volume 223 × 223 × 205 mm
Compatible materials PLA, ABS, Flexible
Minimum Layer Height 0.06 mm
Heated Build Plate Yes
More Information [{{{moreInformation}}} Ultimaker 2+]

These are the presets for the different nozzles on the Ultimaker 2+.

Using 0.4 nozzle

Fast print Normal High
Layer Height (mm) 0.15 0.10 0.06
Top/Bottom Layer thickness (mm) 0.75 1.05 1.05
Wall thickness (mm) 0.7 0.8 0.72
Infill (%) 18 20 22
Build Speed (mm/s) 60 50 50
Travel Speed (mm/s) 150 120 120

Using 0.6 Nozzle

Normal
Layer Height (mm) 0.15
Top/Bottom Layer thickness (mm) 1.2
Wall thickness (mm) 1.59
Infill (%) 20
Build Speed (mm/s) 55
Travel Speed (mm/s) 120

Using 0.8 Nozzle

Low
Layer Height (mm) 0.2
Top/Bottom Layer thickness (mm) 1.2
Wall thickness (mm) 2.1
Infill (%) 20
Build Speed (mm/s) 40
Travel Speed (mm/s) 120