Difference between revisions of "Ultimaker 2+"
Jump to navigation
Jump to search
m |
m |
||
(5 intermediate revisions by 4 users not shown) | |||
Line 2: | Line 2: | ||
| name = Ultimaker 2+ | | name = Ultimaker 2+ | ||
| image = Ultimaker2+.png | | image = Ultimaker2+.png | ||
− | | | + | | slicerName = Cura |
− | | materials = PLA, | + | | slicerLink = https://ultimaker.com/cura |
− | |minLayerHeight=0. | + | | materials =PLA, ABS, Flexible |
− | + | | minLayerHeight =0.06 | |
+ | | heatedBuildPlate =Yes | ||
+ | |float=right|buildWidth=223|buildDepth=223|buildHeight=205|recommendedSettings=https://en.wiki.makerepo.com/wiki/Ultimaker_2%2B}} | ||
+ | |||
+ | These are the presets for the different nozzles on the Ultimaker 2+. | ||
+ | |||
+ | '''Using 0.4 nozzle''' | ||
+ | {| class="wikitable" | ||
+ | | | ||
+ | |Low print | ||
+ | |Normal | ||
+ | |High | ||
+ | |- | ||
+ | |Layer Height (mm) | ||
+ | |0.15 | ||
+ | |0.10 | ||
+ | |0.06 | ||
+ | |- | ||
+ | |Top/Bottom Layer thickness (mm) | ||
+ | |0.75 | ||
+ | |1.05 | ||
+ | |1.05 | ||
+ | |- | ||
+ | |Wall thickness (mm) | ||
+ | |0.7 | ||
+ | |0.8 | ||
+ | |0.72 | ||
+ | |- | ||
+ | |Infill (%) | ||
+ | |18 | ||
+ | |20 | ||
+ | |22 | ||
+ | |- | ||
+ | |Build Speed (mm/s) | ||
+ | |60 | ||
+ | |50 | ||
+ | |50 | ||
+ | |- | ||
+ | |Travel Speed (mm/s) | ||
+ | |150 | ||
+ | |120 | ||
+ | |120 | ||
+ | |} | ||
+ | '''Using 0.6 Nozzle''' | ||
+ | {| class="wikitable" | ||
+ | | | ||
+ | |Normal | ||
+ | |- | ||
+ | |Layer Height (mm) | ||
+ | |0.15 | ||
+ | |- | ||
+ | |Top/Bottom Layer thickness (mm) | ||
+ | |1.2 | ||
+ | |- | ||
+ | |Wall thickness (mm) | ||
+ | |1.59 | ||
+ | |- | ||
+ | |Infill (%) | ||
+ | |20 | ||
+ | |- | ||
+ | |Build Speed (mm/s) | ||
+ | |55 | ||
+ | |- | ||
+ | |Travel Speed (mm/s) | ||
+ | |120 | ||
+ | |} | ||
+ | '''Using 0.8 Nozzle''' | ||
+ | {| class="wikitable" | ||
+ | | | ||
+ | |Low | ||
+ | |- | ||
+ | |Layer Height (mm) | ||
+ | |0.2 | ||
+ | |- | ||
+ | |Top/Bottom Layer thickness (mm) | ||
+ | |1.2 | ||
+ | |- | ||
+ | |Wall thickness (mm) | ||
+ | |2.1 | ||
+ | |- | ||
+ | |Infill (%) | ||
+ | |20 | ||
+ | |- | ||
+ | |Build Speed (mm/s) | ||
+ | |40 | ||
+ | |- | ||
+ | |Travel Speed (mm/s) | ||
+ | |120 | ||
+ | |} | ||
[[Category:3D Printers]] | [[Category:3D Printers]] |
Latest revision as of 14:33, 16 June 2021
Ultimaker 2+
Slicer | Cura |
---|---|
Build Volume | 223 × 223 × 205 mm |
Compatible materials | PLA, ABS, Flexible |
Minimum Layer Height | 0.06 mm |
Heated Build Plate | Yes |
More Information | [{{{moreInformation}}} Ultimaker 2+] |
These are the presets for the different nozzles on the Ultimaker 2+.
Using 0.4 nozzle
Low print | Normal | High | |
Layer Height (mm) | 0.15 | 0.10 | 0.06 |
Top/Bottom Layer thickness (mm) | 0.75 | 1.05 | 1.05 |
Wall thickness (mm) | 0.7 | 0.8 | 0.72 |
Infill (%) | 18 | 20 | 22 |
Build Speed (mm/s) | 60 | 50 | 50 |
Travel Speed (mm/s) | 150 | 120 | 120 |
Using 0.6 Nozzle
Normal | |
Layer Height (mm) | 0.15 |
Top/Bottom Layer thickness (mm) | 1.2 |
Wall thickness (mm) | 1.59 |
Infill (%) | 20 |
Build Speed (mm/s) | 55 |
Travel Speed (mm/s) | 120 |
Using 0.8 Nozzle
Low | |
Layer Height (mm) | 0.2 |
Top/Bottom Layer thickness (mm) | 1.2 |
Wall thickness (mm) | 2.1 |
Infill (%) | 20 |
Build Speed (mm/s) | 40 |
Travel Speed (mm/s) | 120 |