Difference between revisions of "Ultimaker 2+"

From CEED Wiki
Jump to navigation Jump to search
m
m
Line 2: Line 2:
 
| name = Ultimaker 2+
 
| name = Ultimaker 2+
 
| image = Ultimaker2+.png
 
| image = Ultimaker2+.png
| buildVolume = 223 × 223 × 205 mm
+
| slicerName = Cura
| materials = PLA, NinjaFlex
+
| slicerLink = https://ultimaker.com/cura
|minLayerHeight=0.02|heatedBuildPlate=Yes|slicerLink=https://ultimaker.com/cura|slicerName=Cura}}
+
| materials =PLA, ABS, Flexible
 +
| minLayerHeight =0.06
 +
| heatedBuildPlate =Yes  
 +
|float=none|buildWidth=223|buildDepth=223|buildHeight=205|recommendedSettings=https://en.wiki.makerepo.com/wiki/Ultimaker_2%2B}}
 +
 
 
These are the presets for the different nozzles on the Ultimaker 2+.
 
These are the presets for the different nozzles on the Ultimaker 2+.
  

Revision as of 14:19, 16 June 2021

Ultimaker 2+
Ultimaker2+.png
Slicer Cura
Build Volume 223 × 223 × 205 mm
Compatible materials PLA, ABS, Flexible
Minimum Layer Height 0.06 mm
Heated Build Plate Yes
More Information [{{{moreInformation}}} Ultimaker 2+]

These are the presets for the different nozzles on the Ultimaker 2+.

Using 0.4 nozzle

Fast print Normal High
Layer Height (mm) 0.15 0.10 0.06
Top/Bottom Layer thickness (mm) 0.75 1.05 1.05
Wall thickness (mm) 0.7 0.8 0.72
Infill (%) 18 20 22
Build Speed (mm/s) 60 50 50
Travel Speed (mm/s) 150 120 120

Using 0.6 Nozzle

Normal
Layer Height (mm) 0.15
Top/Bottom Layer thickness (mm) 1.2
Wall thickness (mm) 1.59
Infill (%) 20
Build Speed (mm/s) 55
Travel Speed (mm/s) 120

Using 0.8 Nozzle

Low
Layer Height (mm) 0.2
Top/Bottom Layer thickness (mm) 1.2
Wall thickness (mm) 2.1
Infill (%) 20
Build Speed (mm/s) 40
Travel Speed (mm/s) 120