Difference between revisions of "Ultimaker 2+"

From CEED Wiki
Jump to navigation Jump to search
m
Line 5: Line 5:
 
| materials = PLA, NinjaFlex
 
| materials = PLA, NinjaFlex
 
|minLayerHeight=0.02|heatedBuildPlate=Yes|slicerLink=https://ultimaker.com/cura|slicerName=Cura}}
 
|minLayerHeight=0.02|heatedBuildPlate=Yes|slicerLink=https://ultimaker.com/cura|slicerName=Cura}}
These are the preset for the different nozzles on the Ultimaker 2+
+
These are the presets for the different nozzles on the Ultimaker 2+.
  
 
'''Using 0.4 nozzle'''
 
'''Using 0.4 nozzle'''

Revision as of 23:28, 4 March 2019

Ultimaker 2+
Ultimaker2+.png
Slicer Cura
Build Volume {{{buildWidth}}} × {{{buildDepth}}} × {{{buildHeight}}} mm
Compatible materials PLA, NinjaFlex
Minimum Layer Height 0.02 mm
Heated Build Plate Yes
More Information [{{{moreInformation}}} Ultimaker 2+]

These are the presets for the different nozzles on the Ultimaker 2+.

Using 0.4 nozzle

Fast print Normal High
Layer Height (mm) 0.15 0.10 0.06
Top/Bottom Layer thickness (mm) 0.75 1.05 1.05
Wall thickness (mm) 0.7 0.8 0.72
Infill (%) 18 20 22
Build Speed (mm/s) 60 50 50
Travel Speed (mm/s) 150 120 120

Using 0.6 Nozzle

Normal
Layer Height (mm) 0.15
Top/Bottom Layer thickness (mm) 1.2
Wall thickness (mm) 1.59
Infill (%) 20
Build Speed (mm/s) 55
Travel Speed (mm/s) 120

Using 0.8 Nozzle

Low
Layer Height (mm) 0.2
Top/Bottom Layer thickness (mm) 1.2
Wall thickness (mm) 2.1
Infill (%) 20
Build Speed (mm/s) 40
Travel Speed (mm/s) 120