Difference between revisions of "MakerBot Replicator 2"
Jump to navigation
Jump to search
Meganmahoney (talk | contribs) |
m |
||
| Line 3: | Line 3: | ||
| image = Replicator2.png | | image = Replicator2.png | ||
| slicerName = MakerBot Print | | slicerName = MakerBot Print | ||
| − | | slicerLink = https:// | + | | slicerLink = https://support.makerbot.com/s/article/MakerBot-Desktop-Download |
| − | |||
| materials = PLA | | materials = PLA | ||
| minLayerHeight = 0.1 | | minLayerHeight = 0.1 | ||
| heatedBuildPlate = No | | heatedBuildPlate = No | ||
| − | }} | + | |float=right|buildWidth=285|buildDepth=153|buildHeight=155|recommendedSettings=https://en.wiki.makerepo.com/wiki/MakerBot_Replicator_2}} |
=== Replicator 2 Tech Specs === | === Replicator 2 Tech Specs === | ||
{| class="wikitable" | {| class="wikitable" | ||
| | | | ||
| − | | | + | |Low print |
|Normal | |Normal | ||
|High | |High | ||
Latest revision as of 14:51, 16 June 2021
MakerBot Replicator 2
| Slicer | MakerBot Print |
|---|---|
| Build Volume | 285 × 153 × 155 mm |
| Compatible materials | PLA |
| Minimum Layer Height | 0.1 mm |
| Heated Build Plate | No |
| More Information | [{{{moreInformation}}} MakerBot Replicator 2] |
Replicator 2 Tech Specs
| Low print | Normal | High | |
| Layer Height (mm) | 0.3 | 0.2 | 0.1 |
| Number of shells | 2 | 2 | 2 |
| Roof/Floor thickness (mm) | 0.8 | 1 | 1 |
| Infill (%) | 10 | 10 | 15 |
| Build Speed (mm/s) | Varies | Varies | Varies |
| Travel Speed (mm/s) | 150 | 150 | 150 |