Difference between revisions of "MakerBot Replicator 2"
Jump to navigation
Jump to search
m |
m |
||
(One intermediate revision by one other user not shown) | |||
Line 3: | Line 3: | ||
| image = Replicator2.png | | image = Replicator2.png | ||
| slicerName = MakerBot Print | | slicerName = MakerBot Print | ||
− | | slicerLink = https:// | + | | slicerLink = https://support.makerbot.com/s/article/MakerBot-Desktop-Download |
− | |||
| materials = PLA | | materials = PLA | ||
| minLayerHeight = 0.1 | | minLayerHeight = 0.1 | ||
| heatedBuildPlate = No | | heatedBuildPlate = No | ||
− | }} | + | |float=right|buildWidth=285|buildDepth=153|buildHeight=155|recommendedSettings=https://en.wiki.makerepo.com/wiki/MakerBot_Replicator_2}} |
− | + | === Replicator 2 Tech Specs === | |
+ | {| class="wikitable" | ||
+ | | | ||
+ | |Low print | ||
+ | |Normal | ||
+ | |High | ||
+ | |- | ||
+ | |Layer Height (mm) | ||
+ | |0.3 | ||
+ | |0.2 | ||
+ | |0.1 | ||
+ | |- | ||
+ | |Number of shells | ||
+ | |2 | ||
+ | |2 | ||
+ | |2 | ||
+ | |- | ||
+ | |Roof/Floor thickness (mm) | ||
+ | |0.8 | ||
+ | |1 | ||
+ | |1 | ||
+ | |- | ||
+ | |Infill (%) | ||
+ | |10 | ||
+ | |10 | ||
+ | |15 | ||
+ | |- | ||
+ | |Build Speed (mm/s) | ||
+ | |Varies | ||
+ | |Varies | ||
+ | |Varies | ||
+ | |- | ||
+ | |Travel Speed (mm/s) | ||
+ | |150 | ||
+ | |150 | ||
+ | |150 | ||
+ | |} | ||
[[Category:3D Printers]] | [[Category:3D Printers]] |
Latest revision as of 14:51, 16 June 2021
MakerBot Replicator 2
Slicer | MakerBot Print |
---|---|
Build Volume | 285 × 153 × 155 mm |
Compatible materials | PLA |
Minimum Layer Height | 0.1 mm |
Heated Build Plate | No |
More Information | [{{{moreInformation}}} MakerBot Replicator 2] |
Replicator 2 Tech Specs
Low print | Normal | High | |
Layer Height (mm) | 0.3 | 0.2 | 0.1 |
Number of shells | 2 | 2 | 2 |
Roof/Floor thickness (mm) | 0.8 | 1 | 1 |
Infill (%) | 10 | 10 | 15 |
Build Speed (mm/s) | Varies | Varies | Varies |
Travel Speed (mm/s) | 150 | 150 | 150 |