Digital technologies/3D printing/3D printing- Intermediate/Post-Processing 3D prints

From CEED Wiki
< Digital technologies‎ | 3D printing‎ | 3D printing- Intermediate
Revision as of 16:00, 14 July 2021 by Strem078 (talk | contribs) (Created page with "{{#lsth:Digital technologies/3D printing/3D printing- Intermediate|Digital technologies/3D printing/3D printing- Intermediate/Post-Processing 3D prints|Post-Processing 3D pr...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


There are a number of post processing possibilities with 3D printed models. The options available are dependent on the material used. In this section, post-processing possibilities for PLA that are available in the Makerspace will be explored. The video below will explain the basics of post-processing. Everything used in the video is available at the finishing station in the Makerspace.

Retrieved from "https://en.wiki.makerepo.com/mediawiki/index.php?title=Digital_technologies/3D_printing/3D_printing-_Intermediate/Post-Processing_3D_prints&oldid=878"