Digital technologies/3D printing/3D modeling- Advanced/Splitting Models for Printing

From CEED Wiki
< Digital technologies‎ | 3D printing‎ | 3D modeling- Advanced
Revision as of 14:57, 16 July 2021 by Strem078 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

OnShape


Fusion 360


Mold Design

A 3D print does not have to be the final part. 3D printing can also used to make molds. This section was included in the 'Splitting Models for Printing' section since it consists of similar operations as the actual splitting, and at least always requires splitting since the mold will require opening somehow.