Difference between revisions of "Markforged Mark Two"

From CEED Wiki
Jump to navigation Jump to search
(Created page with "{{PrinterInfobox | name = Markforged Mark Two | image = Mk2.png | slicerName = Eiger | slicerLink = https://www.eiger.io/signin | buildVolume = 320 × 132 × 154 mm | mat...")
 
m
Line 8: Line 8:
 
| minLayerHeight = 0.1
 
| minLayerHeight = 0.1
 
| heatedBuildPlate = No
 
| heatedBuildPlate = No
|float=none|buildWidth=320|buildDepth=132|buildHeight=154|recommendedSettings=none}}
+
|float=right|buildWidth=320|buildDepth=132|buildHeight=154|recommendedSettings=https://en.wiki.makerepo.com/wiki/Markforged_Mark_Two}}
  
 
[[Category:3D Printers]]
 
[[Category:3D Printers]]

Revision as of 14:59, 16 June 2021

Markforged Mark Two
Mk2.png
Slicer Eiger
Build Volume 320 × 132 × 154 mm
Compatible materials Nylon, Onyx, Carbon Fiber, Fiberglass, Kevlar
Minimum Layer Height 0.1 mm
Heated Build Plate No
More Information [{{{moreInformation}}} Markforged Mark Two]